|
Winegard HDA-100 Distribution Amplifier 5-1000 MHz 15dB | 
 enlarge | Brand: WINEGARD
Category: CE
List Price: $59.99
Buy New: $34.39
You Save: $25.60 (43%)
New (17) from $34.39
Rating:  2 reviews
Media: Electronics
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 1.4
Dimensions (in): 8.4 x 4.8 x 2.3
MPN: HDA-100
Model: HDA-100
UPC: 615798396640
EAN: 0615798396640
ASIN: B00133NQ9A
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Amplifies signals from 54-1000 MHz 15dB | | • | 5-42 MHz 2-way bi-pass at -2 dB loss | | • | Weather resistant housing to withstand harsh environmental conditions. | | • | Gain: 15 Db |
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
Used To Overcome Signal Loss In Coax Running From Antenna To Tv Low-noise Distribution Amp 54 Mhz - 1000 Mhz Gain: 15 Db
|
| Customer Reviews:
 Works well February 21, 2010
J. Skroch (Maynard, MA USA)
1 out of 1 found this review helpful
This amplifier was easy to install and seems to work well. I have it placed next to my antenna and it drives about 200 ft of RG6 cable until it gets to two televisions. I didn't give it five stars only because I'm stingy with maximum ratings. It could probably do something better, but I can't think of what that would be.
This device stays plugged in all of the time, so I was concerned about the amount of power it consumes. I can't plug it into a switched outlet or power strip and then switch it off when no TV is turned on, because my DVR may record at any time. The given specs tell how much power comes out of the power supply, but not how much goes in. The power consumed from the wall outlet is what you will pay for. Now that I have the amplifier, I can read that the power supply is labeled "Input: 120V AC 60 Hz 65 mA" . That's a maximum power consumption of 120 VAC x 65 mA = 7.8 W. Based on the current drawn by the amp, the wall power under typical use might be closer to 5.1 W. Either number seems reasonable to me.
 Excellent Product with Excellent Customer Support! December 8, 2009
Tech Guy (Iowa, USA)
3 out of 3 found this review helpful
Worked like a charm, I purchased this to overcome signal loss on a long run of RG-6 with 2 Splitters. I emailed Winegard's technical support prior to making the purchase. Winegard's tech support is exceptional in my opinion, tech support needed to know how much cable was used in the system and the splitter loss and locations to properly advise installation. I installed the amplifier in my attic and installed the power inserter in my basement. Be aware you can't use splitters between the amplifier and power inserter. You can use splitters before the amplifier and after the power inserter but not in between the two devices.
|
|
|
Powered by Associate-O-Matic
| |
